The Ninja Warrior Warped Wall - A Floor Obstacle
Ninja Warrior Warped Wall Obstacle
Everyone's favorite obstacle… the warped wall!!
Timing is key to ascending the Ninja Warrior Warped Wall Obstacle, run up jump and reach to grab onto the top. Then pull yourself up and watch the amazement from all of your friends as you conquer this fun but challenging ninja warrior obstacle obstacle - The Warped Wall!
Warped Wall Product Info:
Assembled from 6 main pieces:
base piece
vertical ramp
extension (top)
deck piece
back piece
rubber, trim, cliff hangers
Current Available Warped Wall Sizes:
10’ Wall Height (12’ overall height)
Custom sizes available but pricing may vary so contact us for custom pricing.
Warped Wall Accessories Available:
Top Rails
Wheels
Climbing Rope
Wheels, Hand Rails and Climbing Rope are added accessories that are NOT included unless specified. If you require assistance with installation please let us know we can walk you through it! We currently do not offer the fireman’s pole as a means to descend.
** INDOOR USE ONLY**
Please contact us via email team_ninjas@customdesigncrafts.com if you have any questions or special requests.
SHIPPING: We ship these warped walls out on two 48" x 96" pallets - You will be charged a flat fee at checkout when ordering from this site and then we will contact you with the remaining shipping balance.
Assembly of The Warped Wall:
Assembly in the field consists of anchoring the base into the concrete floor with anchor bolts, bolting the vertical ramp onto the base, connecting the top deck to the wall and the wall of the building, then the extension is bolted on, and then the back is screwed in place (essentially enclosing the warped wall).
The rubber then gets glued onto the ramp with contact cement, trimmed, and the HDPE trim is screwed onto the sides. The cliff hangers are screwed onto one side to be used as a ladder for climbing down from the top.
Ninja Warrior Warped Wall Obstacle
Everyone's favorite obstacle… the warped wall!!
Timing is key to ascending the Ninja Warrior Warped Wall Obstacle, run up jump and reach to grab onto the top. Then pull yourself up and watch the amazement from all of your friends as you conquer this fun but challenging ninja warrior obstacle obstacle - The Warped Wall!
Warped Wall Product Info:
Assembled from 6 main pieces:
base piece
vertical ramp
extension (top)
deck piece
back piece
rubber, trim, cliff hangers
Current Available Warped Wall Sizes:
10’ Wall Height (12’ overall height)
Custom sizes available but pricing may vary so contact us for custom pricing.
Warped Wall Accessories Available:
Top Rails
Wheels
Climbing Rope
Wheels, Hand Rails and Climbing Rope are added accessories that are NOT included unless specified. If you require assistance with installation please let us know we can walk you through it! We currently do not offer the fireman’s pole as a means to descend.
** INDOOR USE ONLY**
Please contact us via email team_ninjas@customdesigncrafts.com if you have any questions or special requests.
SHIPPING: We ship these warped walls out on two 48" x 96" pallets - You will be charged a flat fee at checkout when ordering from this site and then we will contact you with the remaining shipping balance.
Assembly of The Warped Wall:
Assembly in the field consists of anchoring the base into the concrete floor with anchor bolts, bolting the vertical ramp onto the base, connecting the top deck to the wall and the wall of the building, then the extension is bolted on, and then the back is screwed in place (essentially enclosing the warped wall).
The rubber then gets glued onto the ramp with contact cement, trimmed, and the HDPE trim is screwed onto the sides. The cliff hangers are screwed onto one side to be used as a ladder for climbing down from the top.
Ninja Warrior Warped Wall Obstacle
Everyone's favorite obstacle… the warped wall!!
Timing is key to ascending the Ninja Warrior Warped Wall Obstacle, run up jump and reach to grab onto the top. Then pull yourself up and watch the amazement from all of your friends as you conquer this fun but challenging ninja warrior obstacle obstacle - The Warped Wall!
Warped Wall Product Info:
Assembled from 6 main pieces:
base piece
vertical ramp
extension (top)
deck piece
back piece
rubber, trim, cliff hangers
Current Available Warped Wall Sizes:
10’ Wall Height (12’ overall height)
Custom sizes available but pricing may vary so contact us for custom pricing.
Warped Wall Accessories Available:
Top Rails
Wheels
Climbing Rope
Wheels, Hand Rails and Climbing Rope are added accessories that are NOT included unless specified. If you require assistance with installation please let us know we can walk you through it! We currently do not offer the fireman’s pole as a means to descend.
** INDOOR USE ONLY**
Please contact us via email team_ninjas@customdesigncrafts.com if you have any questions or special requests.
SHIPPING: We ship these warped walls out on two 48" x 96" pallets - You will be charged a flat fee at checkout when ordering from this site and then we will contact you with the remaining shipping balance.
Assembly of The Warped Wall:
Assembly in the field consists of anchoring the base into the concrete floor with anchor bolts, bolting the vertical ramp onto the base, connecting the top deck to the wall and the wall of the building, then the extension is bolted on, and then the back is screwed in place (essentially enclosing the warped wall).
The rubber then gets glued onto the ramp with contact cement, trimmed, and the HDPE trim is screwed onto the sides. The cliff hangers are screwed onto one side to be used as a ladder for climbing down from the top.
SHIPPING: Due to the size of these items, they must ship motor freight. There are many variables when shipping via motor freight, so please contact our office for further information so we may calculate actual freight costs.
IF you choose to order online, all freight orders have a standard shipping fee. If your location deems shipping cost more than the fee included in your payment online, we will notify you via email within 24 hours and include a payable invoice for the remainder of the shipping cost. If you do not want to pay the additional shipping cost then you will have the opportunity at that point to cancel your order.
For any questions about shipping, contact our office at: Email: team_ninjas@customdesigncrafts.com Phone: 440-552-4237
Agreement:
Custom Design Crafts, is not responsible for injuries the purchaser may incur due to misuse, improper installation, or falls that may happen while performing the required exercise. Upon purchasing this product the purchaser agree to not hold Custom Design Crafts, its Employees, affiliates or its owners responsible for damages.
